|
Introduction
The
I-7188EX, Embedded Internet/Ethernet Controller, focuses in Embedded
Control applications while the I-7188EN, Internet Communication
Controller, focuses in communication applications.
According to different embedded firmware and application program,
the Internet Communication Controller can be used as Device Server
or Addressable Ethernet to RS-232/485/422 Converter or Embedded
Internet/Ethernet Controller. The user should refer to comparison
table to choose optimal product. Now we offer wide range Internet
Communication Controllers, such as I-7188E1 / E2 /E3 /E4 / E5
/ E8. Except the RTC circuitry, the basic hardware of I-7188EN is
similar to I-7188EX. Since there are too many configurations for
I-7188EN series product, OEM or ODM version is welcomed.
Can
be used as Addressable Ethernet to RS-232/485/422 Converter
Most
RS-232/485/422 devices don¡¦t support device address. The I-7188EN
series can assign a unique address to any RS-232 device installed in
the Ethernet network. Host-PC can send command with device address
to Ethernet network, the destination I-7188EN will remove the
address field & pass the other fields of command to its local
RS-232 device. The response of this local RS-232 device will be
passed to host-PC via this destination I-7188EN.
Can
be used as Ethernet to RS-232/485/422 Device Server
The
Device Server is an appliance that network enables any device with a
serial communication port. By virtue
of
its independent operating system, protocol independence, small size
and flexibility, Device servers are able to meet the demand of
virtually any network-enable application. Most devices don¡¦t have
network ports. Our Internet Communication Controllers allow those
devices to become connected to the network.
Can
be used as Embedded Internet/Ethernet Controller
Except
the Real Time Clock, the hardware and software of I-7188EN is
similar to I-7188EX. The user can use well-developed libraries and
demo programs to implement an Embedded Internet/Ethernet
Controller.
Features
-
AMD
80188-40 Embedded CPU, or compatible
-
Supports a variety of
TCP/IP features, including TCP, UDP, IP, ICMP, ARP
-
10BASE-T
NE2000 compatible Ethernet Controller
-
Reloadable
Operating Software
-
Remote
Configuration
-
Diagnostics
-
64-bit
hardware unique serial number inside
-
COM
driver support interrupt & 1K QUEUE input buffer
|
-
Support
serial port
-
Built-in
EEPROM
-
Built-in
self-tuner ASIC controller on RS-485 port
-
I-7188E1
support one RS-232 port
-
I-7188E2
support one RS-232 port and one RS-485 port
-
I-7188E3
support one RS-232 port, one RS-485 port, one RS-422/485 port and
several DI/O lines
-
I-7188E3-232 two
RS-232 ports,
one RS-485 port and several DI/O lines
-
I-7188E4
support three RS-232 ports and one RS-485 port
-
I-7188E5
support four RS-232 ports and one RS-485 port
-
I-7188E5-485
support one RS-232 ports and
four RS-485 ports
-
I-7188E8
support seven RS-232 ports and one RS-485 port
-
7-segment
LED display for I-7188EnD(n=1,2,3,4,5,8)
-
Built-in
MiniOS7
-
Program
download port: COM1 or Ethernet Port ( Available soon )
Specifications
-
CPU:
Am188™ES, 40M Hz or compatible
-
SRAM:
256K bytes
-
Flash
Memory: 512K bytes; Erase unit is one sector (64K bytes); 100,000
erase/write cycles
-
EEPROM:
2048 bytes ( 8 blocks, each block has 256 bytes); Data retention
> 100 years; 1,000,000 erase/write cycles.
-
Ethernet
port: 10Base-T
-
Watchdog
timer provides fault tolerance and recovery
-
Low
power consumption
-
R.O.C.
Invention Patent No. 086674, No.103060, No. 132457
-
RS-485
interface connector for I-7524/7527: 14-pin screw terminal block (
accepts 16~22 AWG wires ); 3.5mm pitch
-
D/I:
3.5V~30V
-
D/O:
100mA/30V
-
Accessories:
One download cable, one mini screw driver
-
Operating
temperature: -25¢J to +75¢J
-
Storage
temperature: -40¢J to +80¢J
-
Dimensions:
123mm x 72mm x 33mm
-
Power
requirement: Unregulated 10~30 VDC with protection from power
reversals
-
Power
consumption:
2W
(without display)
3W
(with display)
Applications
Factory
Automation
Building
Automation
Home
Automation
|
