Produits
Page principale
PC Industriels
Systèmes d'acquisition et de transmission de données
Capteurs
Cartes à micro-contrôleur STAMP
Produits ICP DAS
 
G S E
Contactez-nous
    

I-7563

USB to 3 Ports RS-485 Converter Hub


Introduction

The I-7563 is a cost-effective module for transfer serial data over USB. It allows you to connect your serial devices to systems using a USB interface. Connecting the I-7563 to a PC, The I-7563 contains ¡§ Self Tuner ¡§ This chip auto-tunes the baud rate and data format to the Rs-485 network. The I-7563 module derives the power from the USB port and doesn¡¦t need any power adapter. It also features a high-speed 115.2 Kb/s transmission rate, and supports various O.S. 

  Do you have any RS-485 wiring problems? The I-7563 is USB to three ports RS-485 Hub. Each channel has its own RS-485 driver IC on it, so it can support star-shaped wiring.

Features

  • Full compatibility with USB 1.1 specifications.

  • Input Port: USB.

  • Output Port: Three RS-485.

  • Speed: ¡§Self Tuner¡¨ inside

  • 3000 V DC Isolation protection provided.

  • 256 modules max. in three channels 
    RS-485
    network without repeater.

  • 2048 modules max. in three channels
    RS-485
    network with repeater.

  • Isolation voltage: 3000V DC

  • Repeater request: 4,000 feet or over 256 modules.

  • Plug-and-play installation.

  • The I-7563 gets the power from USB port; no need external power supply

  • Windows 98/ME/2000/XP drivers supported. Driver for other operating system are currently under development

Specifications

  • Compatibility: USB 1.1 standard

  • Input port : USB

  • Output port:  3-Port RS-485.

  • Cable: USB type A connector (Type A to Type B cable provided).

  • RS-485 Signals: DATA+, DATA-

  • Three-way Isolation voltage: 3000VDC

  • Driver Supported: Windows 98/ME/2000/XP

  • ¡§Self Tuner¡¨ inside, support multiple Baud Rate and multiple Data Format

  • 256 modules max. in three channels RS-485 network without repeater

  • Repeater request: 4,000 feet or over 256 modules

  • Communication distance:

    2.1Km/9600 Bps

    2.7Km/4800 Bps

    3.6Km/2400 Bps

  • Mounting: Din-rail, wall mounting, piggyback stack

  • Power consumption: 1.5 W max.

  • Operating temperature: -25¢J to +75¢J

  • Storage temperature: -25¢J to +80¢J

  • Humidity: 5~ 95%

  • Dimensions: 123 mm x 72 mm x 33 mm

  • Driver Supported : Windows 98/ME/2000/XP,
                                       iMAC OS 10.1X, 10.2.X
    ,Linux

Block Diagram


PIN Assignment


Manual


Ordering Information

I-7563

one port USB to three ports RS-485 converter hub

back