|
Introduction
The I-7561
is a cost-effective module for transfer serial data over USB. It
allows you to connect your serial devices to systems using a USB
interface. Connecting the I-7561 to a PC, you get one or two
extra high-speed RS-232/422/485 ports. Like our I-7520A, the I-7561
contains ¡§ Self Tuner ¡§ This chip auto-tunes the baud rate and data
format to the Rs-485 network. The I-7561 module derives the power
from the USB port and doesn¡¦t need any power adapter. It also
features a high-speed 115.2 Kb/s transmission rate, and
supports various O.S. independent RS-232/422/485 Ports.
Features
-
Full compatibility with USB 1.1
specifications.
-
Input: USB protocol.
-
Output: RS-232/422/485 protocol.
-
Speed: ¡§Self Tuner¡¨ inside
-
3000 V DC Isolation protection
provided.
-
256 modules max. in
one RS-485 network
without
repeater.
-
2048
modules max.
in one RS-485 network
with
repeater.
-
Isolation voltage: 3000V DC
-
Repeater request: 4,000 feet or over
256 modules.
-
Plug-and-play installation.
|
Specifications
-
Compatibility: USB 1.1 standard
-
Input port : USB
-
Output port: 3-wire RS-232, RS-422,
RS-485.
-
Cable: USB type A connector (Type A to Type
B cable provided).
-
RS-232 Signals: TXD, RXD ,GND
-
RS-422 Signals: RX+, RX-, TX+, TX-
-
RS-485 Signals: DATA+, DATA-
-
Isolation voltage: 3000VDC
-
Driver Supported: Windows 98/ME/2000/XP
-
¡§Self Tuner¡¨ inside,
support multiple Baud Rate and multiple
Data Format
-
256 modules max. in one RS-422/485 network
without repeater
-
Isolation voltage: 3000VDC
-
Repeater request: 4,000 feet or over 256
modules
-
Communication distance:
2.1Km/9600 Bps
2.7Km/4800 Bps
3.6Km/2400 Bps
-
Mounting: Din-rail, wall mounting,
piggyback stack
-
Power consumption: 1.5 W max.
-
Operating temperature: -25¢J
to +75¢J
-
Storage temperature: -25¢J
to +80¢J
-
Humidity: 5~ 95%
-
Dimensions: 123 mm x 72 mm x 33 mm
-
Driver
Supported:
Windows 98/ME/2000/XP
|
|
